Volume II, Issue 3, Page 33


Isky has developed a needle-less roller bearing for use with their durable Red Zone™ lifters. EZ Roll™ Bearings can carry far greater loads because of their proprietary low-friction, solid bearing raceway and exclusive multi-point oil delivery system.

Two years of Spintron® testing and on-track use by engine builder Jim Oddy have shown the EZ Roll™ Bearing to be the best performing and most reliable roller lifter bearing on the market. The key is a revolutionary new ultra low-friction material that has a drag coefficient approaching ceramic, but with better impact resistance.

The EZ Roll™ Bearing is available only as an upgrade for new or rebuilt Red Zone™ Lifters. For more information contact Isky Racing Cams, Dept. DRO, 16020 S. Broadway, Gardena, CA 90247-9990.

Call 323-770-0930 or go to www.iskycams.com.


Professional Products now offers their new 4-port regulator featuring O-ring fittings with the regulator. Each regulator comes with one -8 inlet fitting and four -6 outlet fittings in addition to the ¼-inch NPT gauge port that is standard on all POWERFLOW regulators. With an adjustment range of 4.5 to 9 PSI and alcohol resistant Viton seals, these new regulators are perfect for your race or street car, regardless of what fuel you use. Offered in anodized blue or machined aluminum,
POWERFLOW regulators with O-ring fittings feature all-billet construction and polished stainless brackets.

For more information visit www.professional-products.com.


Keep an eye on your vehicle’s performance and vitals with MSD’s new information display, the DashHawk! Simply connect the DashHawk to theDashawk VID diagnostic port and you have access to over 100 parameters on 11 separate screens, including values such as speed, engine rpm, oil pressure, coolant, oil and transmission temps, throttle position and engine load as well as 0-60 and quarter mile times! All of this information can be recorded (up to 90 seconds) and then downloaded to a PC. Once downloaded, you can graph the information using the software supplied.

For more information call (915) 857-5200.

D.O.T. Certified Stainless Braided Hoses From Classic Tube

StopFlex® Stainless Steel Braided Hoses are a multi-layer design comprised of a Teflon inner hose, a Kevlar braid layer and elastomer construction with a stainless steel wire Braided Hoses from Classic Tubebraid. For added durability, a clear vinyl covering prevents dirt fromgetting into the braid. Each pre-made hose section uses weight-saving crimp/swage fittings that exceed the industry's strictest manufacturing standards. StopFlex hoses are made in the USA and are shipped worldwide.

Classic Tube is a manufacturer and supplier of pre-bent replacement hard lines, bulk tubing, tools and accessories.

For more information visit our website at www.classictube.com.

Send press releases to newproducts@maxchevy.com.  

Recent Stories



Here's What's New!