« PREV. PAGE NEXT PAGE »

New Molded ABS Composite Dash for ’79-’81 Camaro

Classic Dash by Covan recently announced a new molded ABS composite dash to suit the 1979 to 1981 Camaro.  This recent addition completes the company’s Camaro range, making composite dash panels available for all Camaro models from 1967 to 1989.  In common with all the company’s previous dash panels, the new ’79-’81 composite dash has a modern clean look and is available in the following finishes: carbon fiber, brushed aluminum, or classic black. 

All Classic Dash panels are offered in three forms: with or without gauges, with or without gauge holes, or complete with gauges installed. Choose from 18 different styles of Autometer or Classic Instrument gauges.

For further information, visit the Covan website www.covansclassic.com for the latest offerings.

Early Camaro Tall Deck Headers

As engine swaps for older muscle cars continue to be popular, the need for specialty headers becomes greater. The original DOUG’S HEADERS announces part #D321, a tuned long tube header, that is specifically designed to fit tall deck Big Block Chevrolet V8 engines like the 572 in 67-69 Camaro’s and 68-72 Chevy II’s and Nova’s.

These headers are built with 3/8” thick flanges at the cylinder head and 3 bolt outlet flanges. The 4 tube, round port, under chassis exit design is made from 16 gauge tubing for durability with Large 2 1/8” primaries and 3 1/2” collectors for increased horsepower and torque at higher RPM and are designed for maximum allowable ground clearance.

They come standard with a polished high luster heat and corrosion resistant metallic ceramic coating for a rich appearance and long life.  These headers come complete with reducers, 1100º F rated gaskets and premium installation hardware.  Headers can also be ordered uncoated.

For more information, please contact your local performance retailer or The original Doug’s Headers at 909 599-5955 www.dougsheaders.com.

BILLET PowerFlow FUEL PRESSURE REGULATORS FROM PROFESSIONAL PRODUCTS

This solid billet aluminum PowerFlow Fuel Pressure Regulator provides great looks, high-performance and low price. It’s a triple win for your ride! PowerFlow is available in bright anodized or blue finish, comes with a stainless mounting bracket and screws, dual 3/8-inch NPT ports and a gauge port. It has all the same features and dimensions as the competition, but is lighter and looks way better! Plus PoweFlow will bolt to a Holley regulator mounting bracket, and all the plumbing ports are the same. Bolt it on, hook it up and go!

Additional features include wench flats on inlet and outlet ports, Viton O-rings and diaphragm, carb models are pre-set to 6-PSI with the EFI models pre-set to 40-PSI. These Professional Products PowerFlow regulators are suitable for up to 450 HP, or use two units for high-horsepower dual-quad applications. The PowerFlow is available in several configurations: #10660 (blue finish) and #10661 (aluminum finish) regulates 4.5-to-9 PSI, and are for use with regular carbs, #10662 (Blue finish) and #10663 (aluminum finish) regulates 2-to-4 PSI for side draft carbs. Suggested retail for your PowerFlow regulator is $45.00.

For additional information on these regulators and their complete line of quality performance parts, contact Professional Products, 12705 South Van Ness Avenue, Hawthorne CA, 90250, 323-779-2020, Fax: 323-754-1207, or visit them at www.professional-products.com.

« PREV. PAGE NEXT PAGE »