« PREV. PAGE NEXT PAGE »

BOW-TIE EMBLEM ELECTRIC WATER PUMP FROM PROFORM/SPECIALTY AUTO PARTS

Proform/Specialty Auto Parts’ all new Bow-Tie Emblem water pumps are the answer to your engine’s summer heating problems. These lightweight and super efficient pumps are officially licensed by GM Performance Parts. By eliminating the weight and pulley drag of a mechanical pump, PROFORM electric pumps can add as much as 15 HP. Their compact design also helps create clearance in tight engine swap applications.

Available for most popular GM small-block engines, PROFORM Bowtie Emblem Electric Water Pumps can circulate up to 35-gallons per minute. Housings are made of lightweight yet durable die-cast aluminum in your choice of five finishes, including three epoxy powder coated colors: Black , Red, Blue, as well as Chrome and Polished. The red Chevrolet Bowtie Emblem is prominent on each housing and color. Each PROFORM Bowtie Emblem Water Pump is packaged with gaskets, hardware and hose fittings.

PROFORM has a complete line of Chevrolet engine dress-up parts as well as internal and external replacement and performance parts. Preview all their parts and inexpensive engine building tools at www.proformparts.com.

Chassisworks’ GM A-Body Bolt-On Coil-Over Conversion

The first in a series of new rear suspension products, Chris Alston’s Chassisworks now offers a top-quality, bolt-on coil-over suspension conversion for 1964-1972 GM A-bodies. The upper and lower shock mount brackets are easily positioned using factory mounting locations on the chassis and 10- or 12-bolt rear-end housing. The bolt-on installation takes just a few hours and requires drilling a few additional holes to securely mount the brackets. Optionally available weld-on versions of the axle brackets and upper shock cross member allow the shocks and lower control arms to be moved inward for additional tire clearance. VariShock coil-over shocks are included in the package and available in 16-position single- or double-adjustable versions to fine tune ride quality and handling performance. Billet-aluminum lower shock mounts can be moved to one of four positions, enabling a ride-height adjustment range of nearly 2”. Kits include matte-black powder-coated upper and lower mounting brackets, billet shock mounts, all mounting hardware, and VariShocks with coil springs (110 to 400 lb/in) or integrated air bags. For complete details visit www.CAChassisworks.com or call direct to 800-722-2269.

DMPE redesigns belt guard for Roots blowers

DMPE's new belt guard is on the list of many new parts offered by Darren Mayer’s supercharger manufacturing company in Stevensville, Michigan. DMPE is constantly trying to rethink all of the products associated with running today’s modern superchargers, and their latest idea is a strong and attractive belt guard for Roots blowers.

The new belt guard can be mounted conventionally or with the new snout mounting bracket that has become popular with the setback blower users (long snouts).  The belt guard is anodized black and the side guards provide improved protection to fuel lines and valuable electronics. The new snout comes with and without external starter provisions, and a bracket is also offered for the PSI screw compressor that is mounted and located by the snout bolts to remove the long and flexible mounts to the front cover.

For information contact DMPE at 5790 St. Joseph Ave., Stevensville, MI 49127. Phone 269-428-5070 or visit www.dmpeinc.com.

« PREV. PAGE NEXT PAGE »